Shop headings: New Spares | Used Spares | Accessories | Brands
High tensile M8 bolt used to retain flywheel on big twins, used in drive box on V35 and V50. See ENA14901 for suitable washers.
Also known as Guzzi ref. 1206700 and 98054425. 6 bolts required for flywheel. Replaces flanged screw used on CARC models. Also used for retaining rear brake disc cover on V35 and V50 (7 bolts required)
More than 5 in stock
12067701-z 12067701 GU12067701 12 06 77 01
1206 7701 1206.7701 12.06.77.01
£0.90
INC VAT
£0.75 EX VAT
Exhaust gasket. Please note that these may need to be trimmed down slightly to fit a V35 / V50. See ENA22040 for alternative
Also known as Guzzi ref. 61025280 19025280. ENA22040 can be used in place of this gasket
More than 5 in stock
61025200 GU61025200 61 02 52 00
6102 5200 6102.5200 61.02.52.00
£2.00
INC VAT
£1.67 EX VAT
Front crank oil seal for models with Bosch or Ducati charging systems
Also known as Guzz ref. 90402839
More than 5 in stock
90402840-Z
£9.50
INC VAT
£7.92 EX VAT
M6 wavy washer
Also known as Guzzi ref. 95129115
More than 5 in stock
03013800 GU03013800 03 01 38 00
0301 3800 0301.3800 03.01.38.00
£0.90
INC VAT
£0.75 EX VAT
M10 schnorr washer, many applications
Anti vibrate washer. Also known as AP8152220
More than 5 in stock
19149800 GU19149800 19 14 98 00
1914 9800 1914.9800 19.14.98.00
£0.70
INC VAT
£0.58 EX VAT
Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.
See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636
More than 5 in stock
1A003632R
Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro
£5.00
INC VAT
£4.17 EX VAT
Cartridge oil filter UFI 23 149 00
Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.
You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket).
Please note that Daytona RS and T5 Polizia use filter SIA15300
More than 5 in stock
14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00
£10.50
INC VAT
£8.75 EX VAT
Quality sump gasket, used for upper sump gasket on V11 Sport, 1100 Sport and Daytona RS. See ENA01360 for lower sump gasket for V11 Sport, 1100 Sport and Daytona RS. See ENA05630 for lower sump gasket for CARC models up to 2015.
Two required if you have a sump extension fitted. Supercedes Guzzi ref. 01003650
More than 5 in stock
14003600 GU14003600 14 00 36 00
1400 3600 1400.3600 14.00.36.00
£4.50
INC VAT
£3.75 EX VAT
A2 M6 x 40mm stainless steel socket cap screw
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT